SIRIUSi-XHS®
TECHNICAL REFERENCE MANUAL
Image 55: Incorrect divider
Important
The maximum sample rate that can be used with the XCP module is 1 MHz. When a higher
sample rate is chosen the module will pop-out the warning.
Image 55: Incorrect sample rate
5.1.3. XCP outputs (channels)
❹
This section is for setting up the XCP outputs. Here you can just click the Auto-Generate
button, which will populate the list with all available device channels, which are set to used
(you can set them to USED under Analog in).
Image 56: Generated AI channels
If the channels will be changed to UNUSED under the Analog Input module, the XCP slave will
recognize those channels and will mark them in red.
SIRIUSi-XHS® - V21-2
44/52
