19
EngLIsh
Date Code Position (Fig. A)
The date code
4
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2020 XX XX
Year and week of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
Wear ear protection.
No hands
A
Hot surface. Do not touch.
Do not expose the tool to rain or high humidity or leave
outdoors while it is raining.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from the tool.
Keep bystanders away.
Directive 2000/14/EC guaranteed sound power.
Package Contents
The package contains:
1 String trimmer
1 Guard
2 Guard screws
2 Washers
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Residual Risks
To ensure you have good footing on slopes, do not overreach.
Keep your balance at all times. Always walk, do not run.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
• Injuries caused by touching any rotating/moving parts.
• Injuries caused when changing any parts, blades
or accessories.
• Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regular breaks.
• Impairment of hearing.
• Use only the appropriate type of cutting line. Never use metal
cutting line or fishing line.
• Keep hands and feet away from the cutting line and blade at
all times, especially when switching on the motor.
• Before using the appliance and after any impact, check for
signs of wear or damage and repair as necessary.
• Take care against injury from any device fitted for trimming
the filament line length. After extending new cutter line always
return the machine to its normal operating position before
switching on.
• Close supervision is necessary when the appliance is used
near children.
• This appliance is not intended for use by young or infirm
persons without supervision.
• This appliance is not to be used as a toy.
• Use in a dry location only. Do not allow the appliance to
become wet.
• Do not immerse the appliance in water.
• Do not open the body casing. There are not user-serviceable
parts inside
• Do not operate the appliance in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
• When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed or direction.
• When not in use, the appliance should be stored in a dry, well
ventilated place out of reach of children.
• Children should not have access to stored appliances.
Safety of Others
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children must be supervised to ensure that they do not play
with the appliance.
• Health hazards caused by breathing dust developed when
using your tool (example: working with wood, especially oak,
beech and MDF.)
• Risk of burns due to accessories becoming hot
during operation.
SAVE THESE INSTRUCTIONS
