DeWalt DE0772, Manual

Page: 16 / 64

14
E N G L I S H
Detecting the laser beam (fi g. A & B)
• Set up the rotary laser at the desired position and
switch it on.
• Switch on the attachment and position the front
side toward the rotary laser. Remember to avoid
looking into the laser beam.
• Move the attachment up or down within the
approximate area of the laser beam until it
detects the beam. Once the beam has been
detected its relative position is shown on the
display (3) while an audio signal is produced.
- When the laser beam is above the level position
the signal will beep rapidly and an arrow
pointing downward (8) will appear on the display.
- When the laser beam is slightly above the
level position the signal will beep rapidly and
an arrow pointing downward (8) to the level
indicator line (9) will appear on the display.
- When the laser beam is below the level position,
the signal will beep slowly and an arrow
pointing upward (10) will appear on the display.
- When the laser beam is slightly below the level
position, the signal will beep slowly and an
arrow pointing upward (10) to the level indicator
line (9) will appear on the display.
- When the laser beam is at the level position the
signal is constant and the level beam indicator
line (9) will appear on the display.
• Adjust the height of the attachment as desired
until the laser beam is at the level position. Mark
the level position.
Consult your dealer for further information on the
appropriate accessories.
MAINTENANCE
Your attachment has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
• Clean the housing using a soft cloth.
• If the housing has become dirty, e.g. from mud or
wet concrete, fl ush it with water.
WARNING: Do not use a high-pressure
cleaner to clean the attachment.
Protecting the Environment
Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your D
E
WALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a
new product.
D
E
WALT provides a facility for the collection and
recycling of D
E
WALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local D
E
WALT office
at the address indicated in this manual. Alternatively, a
list of authorised D
E
WALT repair agents and full details
of our after-sales service and contacts are available
on the Internet at:
www.2helpU.com .
Batteries
• When disposing batteries, think of the protection of
the environment.Check with your local authorities
for an environmentally safe way of battery disposal.