background image

ENGLISH

26

Regardless of whether a shipment is considered 
excepted or fully regulated, it is the shipper’s 
responsibility to consult the latest regulations for 
packaging, labeling/marking and documentation 
requirements.

Transporting batteries can possibly cause fire if the 
battery terminals inadvertently come in contact with 
conductive materials. When transporting batteries, 
make sure that the battery terminals are protected 
and well insulated from materials that could contact 
them and cause a short circuit.

The information provided in this section of the 
manual is provided in good faith and believed to be 
accurate at the time the document was created. 
However, no warranty, expressed or implied, is 
given. It is the buyer’s responsibility to ensure that its 
activities comply with the applicable regulations. 

Battery Pack

BATTERY TYPE

The DCL050 operates on an 18 volt battery pack.

The DCB180, DCB181, DCB182, DCB183 or 
DCB185 battery packs may be used. Refer to 

Technical Data

 for more information.

Storage Recommendations

  1. The best storage place is one that is cool and 

dry away from direct sunlight and excess heat 
or cold. For optimum battery performance and 
life, store battery packs at room temperature 
when not in use. 

  2. For long storage, it is recommended to store a 

fully charged battery pack in a cool, dry place 
out of the charger for optimal results.

NOTE:

 Battery packs should not be stored 

completely depleted of charge. The battery pack will 
need to be recharged before use. 

Labels on Charger and Battery Pack

In addition to the pictographs used in this manual, 
the labels on the charger and the battery pack may 
show the following pictographs:

 

 Read instruction manual before use.

 See 

Technical Data

 for charging time.

100%

 Battery 

charging.

100%

 Battery charged.

 Battery defective.

 Hot/cold pack delay.

 Do not probe with conductive objects.

  Do not charge damaged battery packs.

  Do not expose to water. 

  Have defective cords replaced 

immediately.

 Charge only between 4 ˚C and 40 ˚C.

  Only for indoor use.

   Discard the battery pack with due care for 

the environment.

  Charge D

E

WALT battery packs only with 

designated D

E

WALT chargers. Charging 

battery packs other than the designated 
D

E

WALT batteries with a D

E

WALT charger 

may make them burst or lead to other 
dangerous situations.

   Do not incinerate the battery pack.

Package Contents

The package contains:

 1 LED worklight

 1 Instruction manual

 1 Exploded drawing

NOTE:

 Battery packs, chargers and kitboxes are 

not included with bare units.

  •  Check for damage to the tool, parts or 

accessories which may have occurred during 
transport.

  •  Take the time to thoroughly read and 

understand this manual prior to operation.

Description (fi g. 1, 5)

 

  

WARNING: 

Never modify the worklight 

or any part of it. Damage or personal 
injury could result.

Summary of Contents for DCL050













Reviews: