background image

DCE041 

ENGLISH

D

e

WALT TAG

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of 
personal injury or property damage.

 

DANGER:

 Indicates an imminently hazardous situation which, if not avoided, 

will 

result in 

death or serious injury

.

 

WARNING:

 Indicates a potentially hazardous situation which, if not avoided, 

could

 result in 

death or serious injury

.

 

CAUTION:

 Indicates a potentially hazardous situation which, if not avoided, 

may

 result in 

minor or moderate injury

.

 

(Used without word) Indicates a safety related message.

NOTICE:

 Indicates a practice 

not related to personal injury

 which, if not avoided, 

may

 result in 

property damage

.

WARNING:

 To reduce the risk of injury, read the instruction manual.

If you have any questions or comments about this or any 

D

e

WALT

 tool, call us toll free at: 1-800-4-

D

e

WALT

  

(1-800-433-9258).

GENERAL SAFETY WARNINGS

 

WARNING!

 

Read all safety warnings and all instructions. 

Failure to follow the warnings and instructions may result 

in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS 

FOR FUTURE REFERENCE

1 .  This device contains a factory-installed coin cell battery. It cannot be removed or replaced.
2 .  Chemical burn hazard. Keep out of reach of children.
3 .  Do not use in extreme hot or cold conditions. Keep between -30 °F (-34 °C) and 140 °F (60 °C).
4 .  Choking hazard. Keep out of reach of children.
5 .  This device contains a lithium button/coin cell battery. Do not force open the device as the battery can cause severe internal 

burns and lead to death in as little as 2 hours if swallowed or enters the body. If the device is damaged in any way, stop 
using the device and keep it away from children. If you think batteries may have been swallowed or entered the body, seek 
immediate medical attention.

6 .  If coin cell battery contents come into contact with the skin, immediately wash area with mild soap and water. If coin cell 

battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is 
needed, the battery electrolyte is composed of an organic solvent and lithium salts.

7 .  Do not incinerate or dismantle this device.
8 .  Under abusive conditions, liquid may be ejected from the device. Avoid contact. If contact accidentally occurs, flush with water. 

If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

9 .  DO NOT dispose of device together with household waste material! Appliance that has reached the end of its life must be 

collected separately and returned to an environmentally compatible recycling facility. 

The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V ......................... volts
Hz .......................hertz
min .....................minutes

 or DC ......direct current

 ...................... Class I Construction (grounded)

…/min ..............per minute
BPM ....................beats per minute
IPM .....................impacts per minute
RPM .................... revolutions per minute
sfpm ................... surface feet per minute
SPM ....................strokes per minute
A .........................amperes
W ........................watts

 or AC ...........alternating current

 or AC/DC .... alternating or direct current

 ...................... Class II Construction (double insulated)

no .......................no load speed

n .........................rated speed

 ......................earthing terminal

 .....................safety alert symbol
 .....................visible radiation
 ..................... wear respiratory protection
 .....................wear eye protection
 ..................... wear hearing protection
 ..................... read all documentation

 ...................... Tool  Connect

 home

Storage Recommendations

The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold.

Wireless Certifications and Safety Information

•  This device is CAN ICES-3(B)/NMB-3(B) compliant.
•  This device complies with Part 15 of the FCC rules and Industry Canada License-exempt RSS standard(s). Operation is subject to 

the following two conditions:

 

ʵ This device may not cause harmful interference, and

 

ʵ This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

 

ʵ Reorient or relocate the receiving antenna.

 

ʵ Increase the separation between the equipment and adaptor.

 

ʵ Connect the equipment into an outlet on a circuit different from that to which the adaptor is connected.

 

ʵ Consult the dealer or an experienced radio/TV technician for help.

•  Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to 

operate the device. This Class B digital apparatus complies with Canadian ICES-003.

•  Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or 

lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna 
type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary 
for successful communication.

•  To comply with FCC and Industry Canada RF radiation exposure limits for general population, the antenna used for this device 

must not be co-located or operating in conjunction with any other antenna or transmitter.

For Bluetooth

®

 Products

•  When traveling on airlines, be sure to comply with the airline restrictions on usage of personal electronic devices and 

Bluetooth®.

•  The out of range alert feature has been designed to act as an aid to warn against products getting misplaced or stolen. It is not 

a security system.

•  The connectivity range is up to 100 feet (30.5 meters) depending on environment and location.
•  The shortwave radio frequency signals of a Bluetooth® device may impair the operation of other electronic and medical devices 

(such as pacemakers or hearing aids).

NOTE:

 The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such 

marks by 

D

e

WALT

 is under license. Other trademarks and trade names are those of their respective owners.

INTENDED USE

This 

D

e

WALT

 Tag is designed for tracking and locating professional power tools, equipment, and machines using the 

D

e

WALT

 

Tool Connect™ app. Do not use 

D

e

WALT

 Tag to track or locate people or animals. 

DO NOT

 let children come into contact 

with it.

D

e

WALT Tool Connect™

This 

D

e

WALT

 Tag is capable of connecting with mobile devices that support Bluetooth® Smart (or Bluetooth® 4.0) technology. 

(To see if your mobile device is compatible, visit: 

http://www.bluetooth.com/Pages/Bluetooth-Smart-Devices-List.aspx)

D

e

WALT

 Tool Connect™ is an application for your smart device (such as a smart phone or tablet) that can connect and control 

your 

D

e

WALT

 Tag.

NOTE: 

The Tool Connect™ App is governed by separate terms and conditions available for viewing through the 

mobile application.

Pairing and Activating the D

e

WALT Tag (Fig. A)

Download the 

D

e

WALT

 Tool Connect™ application at:

 

   

•  Follow the instructions in the app to create your Tool Connect™ account.
•  On the Home screen of the app, select "+ Tool" to begin the process of adding your Tag to the app.
•  To connect your Tag with the 

D

e

WALT

 Tool Connect™ app, at the appropriate screen, press the button 

 1 

 on the front 

of the Tag until the blue LED 

 3 

 on the front of the Tag begins to blink. The tool can only be connected to one Tool 

Connect™ account at a time.

•  Once the Tag has been connected, you can confirm that you would like to register the product.
For more information on 

D

e

WALT

 Tool Connect™ functionality and features, please call 1–800–4-

D

e

WALT

 (1–800–433–9258), 

visit 

www.

D

e

WALT

.com 

or view the FAQ page and help screens located inside the mobile application.

Installing the D

e

WALT Tag

 

WARNING:

 Do not apply the Tag to product where it will become wet or exposed to flammable liquids or gases.

 

WARNING:

 Do not secure in such a way as to impede or compromise the safe use of the Tag or the product to which the 

Tag is attached. Do not mount near rotating parts, heat producing surfaces, or where it will interfere with the operation 
of guards.

 

WARNING:

 Do not overtighten screws, rivets or other fasteners as this may damage the Tag. 

 

WARNING:

 Do not pierce the Tag with screw, nail, drill bit, etc.

 

WARNING:

 When drilling holes for mounting, do not drill or use fasteners where hidden wiring, hoses, pipes, etc. can be 

pierced or damaged. Do not mount with screws or rivets to power tools, electrical devices, or battery packs unless they are 
specifically designed to accommodate the 

D

e

WALT

 Tag.

The 

D

e

WALT

 Tag is designed to track tools and equipment using the Tool Connect™ app. It will not prevent theft from 

happening. The Tag can be installed in a variety of orientations. Consider installing the Tag to prevent tampering.
The Tag can be installed using the following attachment options:
•  #6 Pan head self-tapping screw through one or both of the mounting holes 

 2 

.

•  Glue or epoxy to back of Tag. Be sure glue or epoxy is compatible with mounting surface.
•  5/32 diameter rivet through one or both of the mounting holes 

 2 

.

•  Adhesive backing.
•  Cable or zip tie through one or both of the mounting holes 

 2 

.

Technical Data

DCE041

Voltage

V

DC

3

Battery life

3 Years

Signal Range

<100' (30.5 m)

FCC ID

YJ7-DCE041

IC

9082A-DCE041

Ingress Protection

IP68

Weight

0.60 oz (0.017 kg)

MAINTENANCE
Cleaning

 

WARNING:

 Never use solvents or other harsh chemicals for cleaning the Tag. These chemicals may weaken the plastic 

materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the Tag; 
never immerse into a liquid.

Repairs

The Tag is not serviceable.

 

WARNING: 

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection 

and replacement, when applicable) should be performed by a 

D

e

WALT

 factory service center or a 

D

e

WALT

 authorized 

service center. Always use identical replacement parts.

Removal

It is not necessary to remove a non-functioning Tag.

 

WARNING:

 When removing an epoxied or glued Tag, use appropriate personal protective equipment. Removal should not 

in any way compromise the item to which the Tag is attached.

Register Online

Thank you for your purchase. Register your product now for:
• 

WARRANTY SERVICE:

 Registering your product will help you obtain more efficient warranty service in case there is a 

problem with your product.

• 

CONFIRMATION OF OWNERSHIP:

 In case of an insurance loss, such as fire, flood or theft, your registration of ownership 

will serve as your proof of purchase.

• 

FOR YOUR SAFETY: 

Registering your product will allow us to contact you in the unlikely event a safety notification is 

required under the Federal Consumer Safety Act.

Register online at www.dewalt.com/register.

3 YEAR WARRANTY

D

e

WALT

 will replace any defective Tag any time within 3 years after purchase.

FREE WARNING LABEL REPLACEMENT:

 If your warning labels become illegible or are missing, call 1-800-4-

D

e

WALT

  

(1-800-433-9258) for a free replacement.

Fig. A

1

2

2

3

DCE041 

FRANÇAIS

 

PLAQUE D’IDENTIFICATION D

E

WALT

Définitions : symboles et termes d'alarmes sécurité

Ces guides d'utilisation utilisent les symboles et termes d'alarmes sécurité suivants pour vous prévenir de situations 
dangereuses et de risques de dommages corporels ou matériels.

 

DANGER :

 indique une situation dangereuse imminente qui, si elle n’est pas évitée, 

entraînera

 la 

mort ou des 

blessures graves

.

 

AVERTISSEMENT : 

indique une situation potentiellement dangereuse qui, si elle n’est pas évitée, 

pourrait

 entraîner la

 

mort ou des blessures graves

.

 

ATTENTION : 

indique une situation potentiellement dangereuse qui, si elle n’est pas évitée, 

pourrait

 entraîner des 

blessures légères ou modérées

.

 

(Si utilisé sans aucun terme) Indique un message propre à la sécurité.

AVIS : 

indique une pratique ne posant 

aucun risque de dommages corporels

 mais qui par contre, si rien n’est fait pour 

l’éviter, 

pourrait

 poser des

 

risques de dommages matériels

.

AVERTISSEMENT : 

afin de réduire le risque de blessures, lire le mode d’emploi de l’outil.

Pour toute question ou remarque au sujet de cet outil ou de tout autre outil 

D

e

WALT

, composez le numéro sans 

frais : 1-800-4-

D

e

WALT

 (1-800-433-9258).

Reviews: