background image

8

INTENDED USE

These heavy-duty impact wrench/drivers are designed for professional impact 

screwdriving  applications. The impact function makes this tool particularly useful for 

driving fasteners in wood, metal and concrete. 

DO NOT

 use under wet conditions or in 

presence of flammable liquids or gases.
These heavy-duty impact wrench/drivers are professional power tools. 

DO NOT

 let 

children come into contact with the tool. Supervision is required when inexperienced 

operators use this tool.

OPERATION

WARNING: To reduce the risk of serious personal injury, turn tool off and 

disconnect battery pack before making any adjustments or removing/installing 

attachments or accessories.

Installing and Removing the  

FIG. 2

H

Battery Pack (Fig. 2)

NOTE: 

Make sure your battery pack is 

fully charged. 

To install the battery pack into the tool 

handle

, align the base of the tool with 

the notch inside the tool’s handle 

(Fig. 2) and slide the battery pack firmly 

into the handle until you hear the lock 

snap into place.

To remove the battery pack from the 

tool

, press the release buttons (H) and firmly pull the battery pack out of the tool 

handle. Insert it into the charger as described in the charger section of this manual.

Switch 

DW059-XE (FIG. 3)

Pressing the BOTTOM part of the rocker switch (B) runs the tool in forward (right 

hand thread) direction. Pressing the TOP of the switch reverses motor direction. This 

allows “rocking” fasteners to break them loose.

Foreign materials of a conductive nature such as, but not limited to, steel wool, 

aluminum foil, or any buildup of metallic particles should be kept away from 

charger cavities. Always unplug the charger from the power supply when there is 

no battery pack in the cavity. Unplug charger before attempting to clean.

  6. Do not freeze or immerse charger in water or any other liquid.

WARNING:

 

Shock hazard. Don’t allow any liquid to get inside charger. Electric 

shock may result. 

CAUTION: 

Never attempt to open the battery pack for any reason. If the plastic 

housing of the battery pack breaks or cracks, return to a service center for recycling.

Storage Recommendations

  1. The best storage place is one that is cool and dry away from direct sunlight and 

excess heat or cold.

  2. Long storage will not harm the battery pack or charger. Under proper conditions, 

they can be stored for 5 years or more.

SAVE THESE INSTRUCTIONS 

FOR FUTURE USE

Motor

Voltage decrease of more than 10% will cause loss of power and overheating. All 

D

E

WALT tools are factory tested; if this tool does not operate, check your battery 

pack.

COMPONENTS

WARNING: 

Never modify the power tool or any part of it. Damage or personal 

injury could result.
  A. Trigger switch 

F.  Detent pin

  B. Rocker switch (DW059-XE) 

G.  Anvil

  C. Forward/reverse button 

H.  Battery release buttons

 D. Sleeve 

I. Worklight

  E. 6.35 mm (1/4") hex 

quick-release chuck 

Summary of Contents for DC820-XE

















Reviews: