30
ENGLISH
DATE CODE POSITION (FIG. 2)
The date code (ii), which also includes
the year of manufacture, is printed
into the housing.
Example:
2012 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Table top mitre saw
1 Saw blade*
1 Parallel rip fence assembly (A5, Fig. 9A)
1 Upper blade guard
1 Push stick*
1 T30 star wrench*
1 T40 star wrench*
1 Material clamp
1 Instruction manual
1 Exploded drawing
*
Assembled with Table Saw
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior to
operation.
Description (fi g. 1
–
4)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
FIG. 1
a. On/off switch
b. Operating handle
c. Head lock-up release lever
d. Worklight on/off switch
e. Saw bench table locking knob 2
f.
Saw
blade
g. Movable lower blade guard
h. Fence, right-hand side
i.
Fixed
table
j.
Kerf
plate
k. Saw
kerf
l. Rotating table/mitre arm
m. Mitre knob
n. Mitre latch
o. Mitre scale
p. Fence, left-hand side (sliding)
q. Mounting holes
r.
Foot
s. Hand
indentation
t.
Guide
groove
u. Left-side fence clamping knob
v. Lower dust collection ports
w. Saw bench table
x. Riving
knife
y. Upper blade guard
z. Upper dust collection port
FIG. 2
aa. Push stick
bb. Saw bench table locking knob 1
cc. Head lock-down pin
dd. Bevel pointer
ee. Bevel scale
ff. Spindle lock button
gg. T30 star wrench
hh. T40 star wrench
ii.
Date
code
FIG. 3
jj. Bevel clamp handle
Optional accessories
FIG. 4
kk. Extension work support, DE7023-XJ, DE7033-XJ
INTENDED USE
Your D27113 table top mitre saw has been developed for professional
applications. This high precision machine can be easily and quickly set to
crosscut, bevel, mitre, or compound mitre.
This unit is designed for use with a nominal blade diameter 305 mm carbide
tip blade for professional applications and intended for cutting wood and
analogous materials.
DO NOT
use under wet conditions or in presence of flammable liquids or
gases.
These table top mitre saws are professional power tools.
DO NOT
let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
WARNING!
Do not use the machine for purposes other than
intended.
Electrical Safety
The electric motor has been designed for one voltage only. Always check
that the power supply corresponds to the voltage on the rating plate.
Your D
E
WALT tool is double insulated in accordance with
EN 61029; therefore no earth wire is required.
WARNING:
115 V units have to be operated via a fail-safe
isolating transformer with an earth screen between the primary
and secondary winding.
If the supply cord is damaged, it must be replaced by a specially prepared
cord available through the D
E
WALT service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING:
No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Fitting a Mains Plug to 115 V Units
(U.K. and Ireland Only)
The plug should be fitted by a competent person. If you are in doubt,
contact an authorised D
E
WALT repair agent or a qualified electrician.
The plug fitted should comply with BS EN 60309 (BS4343) 16 Amps,
earthing contact position 4h.
Using an Extension Cable
If an extension cable is required, use an approved 3–core extension cable
suitable for the power input of this tool (see
Technical Data
).The minimum
conductor size is 1.5 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
