Page 26 of 63
SECTION THREE.
Re-assembly of Gearbox & Crankshaft .
Service Tooling required 559618-99/ 559617-99 / 559621-99.
q
Make sure the Ring Seal (46) is fitted to
Crank Shaft SA (45)
Place Main Housing on Press base so the threaded part of
the Crank Shaft can be pushed through.
q
Press Crankshaft into Main Housing to its limit. Check
the shaft rotates freely in the bearings.
q
Fit New O-Ring (79) to front of Main Housing.
