Introduction 12
devolo Magic 2 LAN DINrail
2.3 The devolo Magic adapter fea-
tures
b
Four line connections
b
One Gigabit network connection
b
Three indicator lights
a
Power
a
PLC
a
Ethernet
The LED status display can be disabled. You can
find more information about this in Chapter
or in the product manual for the
devolo Cockpit software available online at
b
One PLC button
b
One reset button
2.3.1Line connections
This is where you connect the conductors to the
corresponding line connections.
Single-phase connection
: Neutral conductors and
external conductors are connected to terminals N
and L1.
Three-phase connection
: Neutral conductors and
three external conductors are connected to termi-
nals
N
,
L1
,
L2
and
L3
. The device is supplied with
power via terminals
N
and
L1
.
PE connection
: Connecting the earth wire to the
PE terminal
The permitted
conductor cross-section
for
connection to the terminals is
0.18 mm² to 6 mm²
.
2.3.2 Network connection
You can use the network connection (Fig. 2) on the
devolo Magic adapter to connect it to your inter-
net router using standard network cables.
