Connection and Startup
|
|
devolo dLAN 200 AVpro i
|
12
2.3
Connecting the
dLAN 200 AVpro i
In this section, we will show you how to connect and start the
dLAN 200 AVpro i.
햲
Use the included AC adapter cable to connect the dLAN 200 AVpro i to a
power supply grid.
햳
Use the supplied Ethernet cable to connect the dLAN 200 AVpro i to the
Ethernet connector on the computer that is switched on.
햴
Select the transmission medium:
To use the power supply grid as the transmission medium:
The switch on the back of the device must have been set to "Hybrid" to
allow transmission across the power supply grid.
To use the coaxial network as the transmission medium:
Connect the dLAN 200 AVpro i to the coaxial connector with the coaxial
cable provided for this purpose.
The switch on the back of the device must have been set to "Coax" to
allow transmission across the coaxial network.
햵
Continue with the installation of the devolo dLAN 200 AVpro i software. For
more information, refer to the chapter on 'devolo dLAN 200 AV software'.
No drivers are required for running the dLAN 200 AVpro i.
Summary of Contents for dLAN 200 AVpro i
Page 1: ...dLAN 200 AVpro i...
