Devine Artis Series User Manual Download Page 4

- Avoid exposure to high sound pressure levels for a longer period of time.  See the charts on this 
page for more information about sound pressure levels and exposure to high levels. 

Continuous dB

Permissible exposure time

85

8 hours

88

4 hours

91

2 hours

94

1 hour

97

30 minutes

100

15 minutes

103

7.5 minutes

106

3.75 minutes (<4 minutes)

109

1.875 minutes (<2 minutes)

112

0.9375 minutes (<1 minute)

115

0.46875 minutes (+/- 30

seconds)

- When installing this speaker on a speaker stand or distance pole, always tighten the screw knobs firmly. 
- When using this speaker for the first time, set the gain settings on the amplifier (module) on a minimum 
level. After this, raise the volume to a comfortable listening level (not at its maximum level). The speaker 
needs to perform on a moderate level for several hours to perform on its full potential, when used for the first 
time. 
- When transporting the speaker on a cart, use caution during movement. Prevent the cart and speaker 
combination from tipping over as this may cause serious injury.

Any information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 3.0

Creation date + author initials: 04-12-2013 RV Revision date + author initials: 29-03-2014 RV

Summary of Contents for Artis Series








Reviews: