© ITW LTD 1994
SB-E-2- 782-B
Operation Manual:
AGF-508 Automatic Gun
Important:
Read and follow all instructions and SAFETY PRECAUTIONS
before using this equipment
A lightweight automatic spray gun for small work suitable for use with most solvent based coating materials. The design
features, a single air supply to operate the single acting cylinder and provide the atomising air. A remotely positioned two-way
control valve (supplied by user) triggers the gun. Coating material supply is by a pressure feed system.
IMPORTANT:
These guns are not designed for use with highly corrosive or highly abrasive coating material and if used with
such materials it must be expected that the need for thorough cleaning and/or the necessity for replacement parts will be
increased. If there is any doubt regarding the suitability of a specific material, advise what material is to be used and/or submit
a sample for test.
AGF-508EL-92
Spray gun fitted with 1.8 mm nozzle and No. 92 air cap.
AGF-508FL-90
Spray gun fitted with 1.0 mm nozzle and No. 90 air cap.
When ordering add the hose connecting thread required.
HOSE CONNECTION:
THREAD CODE
‘B’
‘N’
Air supply:
1
/
4
" BSP
1
/
4
" NPS
Coating material supply:
1
/
4
" BSP
1
/
4
" NPS
MAXIMUM RECOMMENDED WORKING PRESSURES:
Air supply
: P
1
= 7 bar (100 lbf/in
2
).
Coating material supply
: P
2
= 7 bar (100 lbf/in
2
).
MINIMUM CYLINDER AIR PRESSURE:
: 4 bar (60 lbf/in
2
).
WEIGHT:
Gun less mounting stud
: 375g.
Mounting stud
: 110g.
SPECIFICATIONS
MODELS
DESCRIPTION
