Instruction Manual
1/3” Day-Night All in One Color Camera with
AI Varifocal Lens & Cable Management Bracket
INTRODUCTION
The high resolution True Day/Night, all in one
digital color cameras have been developed using the advanced technology of Digital
Signal Processing LSI (DSP) together with a interline transfer CCD.
This series of cameras is suitable for surveillance applications or an input device for an image processing system
.
PRECAUTIONS
1.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside. Refer servicing to qualified
service personnel.
2.
Handle the camera with care.
Do not abuse the camera. Avoid striking or shaking it. The camera could be damaged by improper handling or storage.
3.
Never face the camera toward the sun.
Whether the camera is in use or not, never face it toward the sun. Do use cautiously when operating the camera in the vicinity of
spot lights or other bright lights and light reflecting objects.
4.
Do not operate the camera beyond its temperature, humidity or power source ratings.
Do not use the camera in an extreme environment where high temperature or high humidity exists. Use the camera under
conditions where temperatures are within -10~+50, and humidity is below 80% RH.
5.
Do not touch the CCD sensor directly with your fingers. If necessary, use soft cloth moistened with alcohol to wipe off the dust.
6. When the camera is not in use, keep the lens closed or lens cap attached to protect the CCD sensor.
Safety Advice
Don’t touch the CCD Chip with your fingers.
Use the camera only with the voltage as mentioned on the type plate.
Use a monitor with 75 ohm impedance.
Never open the camera. Otherwise warranty is void.
FEATURES
z
1/3” Sharp / Sony High Res. IR Camera with External Focus Adjustment
z
Plug & Play Installation - Compact Size + Sun Cable Management Bracket
z
Effective Range up to 40M with Low / Mid / High Level Selectable
z
Flickerless, AGC, AES & BLC On/Off Selectable
z
With Tempered Glass - Split Glass Technology to Avoid IR Reflection for Option
z
3.7-12mm AI Varifocal Lens with Removable IR-cut Filter (Option: 9-22mm Ai Varifocal Lens w/ Removable IR-cut Filter)
z
0 Lux with Built-in IR-LED
z
42x Built In IR LED
z
Video Cable with BNC Connector
z
Weatherproof
INSTALLATION & OPERATION
1. Install Camera
Use the supplied screws (in the accessories bag), and secure the camera in position.
2. Adjust 2-Axis Bracket
Adjust the bracket while checking the view angle from the monitor. Loosen the X-Y screws and then adjust the 2-Axis
bracket (X-Y Axis) to get the desired viewing angle.
3. Focus Adjustment
Focus adjustment should be done with zoom focus at the same time. Use the screwdriver to adjust the zoom/ focus ratio
(from wide to tele or near to far).
NOTE: Focus adjustment position differs depending on model type.
