![Develtron 22758 Quick Start Manual Download Page 1](http://html.mh-extra.com/html/develtron/22758/22758_quick-start-manual_2488696001.webp)
Feature
Parameter
12-36VDC
Constant voltage
3x(60-180)W
3x5A
Wiring diagram
Product Size
Remote
Operation Voltage
DIMENSIONS
ø/h (mm)
Operation
Frequency
3VDC
39x136.5x10.7
434MHz/868MHz
Receiver
136.5
40.0
11.5
Its a receiver is a single zone RF wireless RGB controller. 1 remote 22758 can control an endless
number of receivers synchronously. All receivers will share the same ID address, can also work with power
repeater to expand output unlimitedly.
1)Receiver Connection Diagram for Single Unit
2)
Connection Diagram for Multiple Units
Receiver
Power Supply
12-36VDC
L
N
110V-230VAC
Power Supply
12-36VDC
L
N
110V-230VAC
22758
RF RGB Controller
R
G
B
Learning
Key
22758
RF RGB Controller
R
G
B
Learning
Key
22758
RF RGB Controller
R
G
B
Learning
Key
22758
RF RGB Controller
R
G
B
Learning
Key
After you have wired all the receivers according to Figure illustration you need to do the following:
1.
Pull off the plastic film cover of the battery at the back of remote.
2.
Master receiver learning: short press the Learning Key on the receiver, and then immediately press the
.
Once you do that, the LED lights will blink once.
Slave receiver learning: short press the Learning Key on the receiver, and then immediately press the any
button on the remote except .
After master and slave learning, please Long Press for 3 seconds to reset. (necessory)
Why should there be 2 methods of learning?
When one remote is being used to control multiple receivers that are working together simultaneously after
some time in operation they may lose synchronously. The receiver which is done the master learning will
synchronize all slave receivers automatically.
Notice: there can be only one master receiver, all the others be slave receivers.
Button Instructions:
: short press to turn ON/OFF; long press for 3 seconds to reset.
: 10 built-in dynamic color changing modes; short press to get a dynamic mode, press again to pause to
have a static color, press again to get a next dynamic mode.....
Operation
REMARKS
RF Wireless
Input Voltage
Remarks
Output Current
Output Power
One Zone RF Wireless LED RGB Controller