Develop SU-502, User Manual

Page: 61 / 170

Getting ready
3
SU-502 3-23
Specifying the POP3 server address
1
Press the [Utility] key.
The Utility mode menu appears.
2
Press the + or , key until E-MAIL
SETTING 2
appears.
3
Press the [1] key on the 10-key pad
to select
POP3 SERVER .
4
Enter the IP address or host name of
the POP3 server.
– For information on entering text,
refer to “Entering text characters”
on page 2-15.
– Up to 64 characters can be entered for the host name.
– The DNS settings must have been specified before the host name
for the POP3 server can be specified.
– The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
5
Press the [Yes] key.
The e-mail setting 2 screen appears.
[ ]