Develop SU-502 User Manual Download

Page: 51 / 170

Getting ready

SU-502

3-13

Specifying the subnet mask

From the network setting menu in the
utility mode, press the [2] key on the
10-key pad to select

SUBNET

MASK

Using the 10-key pad, enter the sub-
net mask value.

–

The illustration at the right is an
example of a subnet mask ad-
dress. Consult your network administrator for details about these
settings.

Press the [Yes] key.

The network setting screen appears. To register settings in the ma-
chine, the machine must be turned off, then on again.

While the network setting screen is displayed, press the [No/C] key or
[Panel Reset] key so that the message

PLEASE RE-START POWER

SUPPLY OFF/ON

appears.

Set the power switch of the machine to “

”, then “

” to restart the ma-

chine.

Summary of Contents for SU-502











































































































































































Search results

Summary of Contents for SU-502

Reviews:

Related manuals for SU-502

Brands by name

Popular brands

Develop SU-502, User Manual

Search results

Summary of Contents for SU-502

Reviews:

Related manuals for SU-502

Brands by name

Popular brands