Develop NC-5, User Manual

Page: 18 / 52

Getting Ready 2
NC-5 2-9
IPP Printing
1
Check that all of the accessories have been included in the package.
(“3 Checking the Accessories”)
2
Connect the network cable. (“4 Connecting the Network Cable”)
3
Specify the IP address, subnet mask, and default gateway settings for
the copier. (“5 Assigning an IP Address”)
4
Print the Configuration Page and check the settings. (“6 Printing the
Configuration Page”)
✎
Note
The Configuration Page cannot be printed for copiers that are not
equipped with the fax function.
5
Install the printer driver. Add a network port during the installation of
the printer driver.
❍ For details on installing the printer driver, refer to “PCL PRINTER
CONTROLLER” or “GDI PRINTER CONTROLLER” in the manual
provided with the copier. For details on specifying the network port,
refer to “7 Connecting the Computer and Copier”.