Develop ineo+ 451 User Manual Download Page 486

Page: 486 / 526

Fax Operations (Option)

7-28

ineo+ 650/550/451

7.11

Sending a fax after specifying a time (Timer TX)

Timer TX is a function that specifies a time for transmission.

It is economical to transmit at discounted calling times, such as late at night or early in the morning.

Note

The following functions cannot be used together with this function.

Total # of Pages setting, Polling TX, Bulletin Board and Quick Memory TX

Detail

Only the time can be specified. Dates cannot be specified.

Specify the time in hours and minutes.

Timer TX can be specified for 21 originals including normal transmission of 20 originals and Polling RX
of 1 original.

To conduct timer TX

Press [Fax/Scan] key, and make the Fax/Scan screen display.

Load the original to be faxed.

–

Refer to "Loading the original" on page 7-6 for details on loading the original.

Touch [Communication Settings].

Touch [Timer TX].

Summary of Contents for ineo+ 451















































































































































































































































































































































































































































































































































Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands

Develop ineo+ 451, User Manual

Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands