Develop ineo+ 451 User Manual Download Page 395

Page: 395 / 526

ineo+ 650/550/451

5-65

Network Scanner Operations

URL notification setting

Specify the e-mail address where notifications of completion of the job are to be sent.

Detail

The destinations that can be specified for "URL Notification Setting" include FTP servers, SMB server
or user boxes.

This feature does not function during e-mail transmissions, even if a setting is specified.

Touch [Communication Settings] in the Fax/Scan mode screen.

Touch [URL Notification Setting].

Specify the e-mail address where notifications will be sent.

–

Select a registered e-mail address.

–

Touch [Direct Input], and then specify the e-mail address for the destination of URL notifications.

Touch [Close], and then touch [Close] in the next screen that appears.

Summary of Contents for ineo+ 451















































































































































































































































































































































































































































































































































Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands

Develop ineo+ 451, User Manual

Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands