Develop ineo+ 451 User Manual Download Page 169

Page: 169 / 526

ineo+ 650/550/451

2-131

Copy Operations

2.36

Adjusting the image to fit the paper ("Image Adjust" settings)

When the copy paper is larger than the original document, copies can be made with the document image
centered and enlarged to fill the paper.

The image can be adjusted in any of the following ways.

Position the document to be copied.

–

For details on positioning the document, refer to "Feeding the document" on page 2-26.

–

If "Full Size" or "Center Zoom" is to be set, position the document on the original glass.

Touch [Application], and then touch [Image Adjust].

–

To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.

The Image Adjust screen appears.

Setting

Description

Full Size

The area that contains the entire image is centered and enlarged to the size of the
paper.

Center Zoom

The image is enlarged to the size of the paper so that the paper is filled. However,
some parts of the image may be lost.

Centering

The image is centered in the paper without being enlarged.

Full Size

Center Zoom

Centering

Summary of Contents for ineo+ 451















































































































































































































































































































































































































































































































































Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands

Develop ineo+ 451, User Manual

Search results

Summary of Contents for ineo+ 451

Reviews:

Related manuals for ineo+ 451

Brands by name

Popular brands