manualshive.com logo in svg

Develop ineo 250, Service Manual Field, Page: 386 / 770

Share
Download
Develop ineo 250 Service Manual Field Download Page 386

Field Service Ver. 1.0 Aug. 2005

6. Utility/Counter Mode

17

FK-503

Adjustment / Setting

6.4

Settings in the User Management

6.4.1

Line Monitor Sound

6.4.2

Memory RX ON/OFF

6.4.3

POP3 RX

Functions

• To set the volume of the line monitor sound that can be heard from the monitor speaker 

during fax transmission.

Use

Setting/
Procedure

• The default setting is “3”.

0 (mute) to 5

Functions

• To allow the machine to produce a print temporarily even in the off mode.
• A print control password is necessary to print data.

Use

Setting/
Procedure

1. Touch the [Memory RX ON/OFF].
2. Type the 4-digit password (default value: 1111) and touch [Enter].
3. Touch the [Lock OFF].
4. To halt the print cycle, touch [Lock ON] and then [Enter] while the print cycle is being 

run.

5. Touch [Temporarily Print] to resume the print cycle.

Functions

• To check reception from the POP3 server.

Use

Setting/
Procedure

1. Touch the [POP3 RX].

Summary of Contents for ineo 250



































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments