manualshive.com logo in svg

Develop ineo 250, Service Manual Field, Page: 229 / 770

Share
Download
Develop ineo 250 Service Manual Field Download Page 229

11. Tech. Rep. Mode

Field Service Ver. 1.0 Aug. 2005

190

bizhub 200/250/350

Adjustment / Setting

<Authentication Setting>

(4) TX/RX Test

(5) Initial data

Functions

• To set whether or not to enable authentication during transmission via the SMTP 

server.

Use

• Use to enable authentication during transmission.

Types of authentication to be set: POP Before SMTP, SMTP authentication

Setting/
Procedure

• The default setting is “OFF”

ON

“OFF”

* If POP Before SMTP is set, make the setting for POP Before SMTP.
• The default setting is “60 sec”

“60 sec” (0 to 60)

* If SMTP authentication is set, make the following settings.
  User ID: Enter the user ID for SMTP authentication.
  Password: Enter the password for SMTP authentication.

Functions

• To carry out the transmission/reception tests for CS Remote Care.

Use

• To carry out the transmission/reception tests for CS Remote Care.

Setting/
Procedure

• Press the Start key to start transmission.
• The test progress and results are displayed on the screen.

Functions

• To initialize server settings.

Use

• To initialize server settings.

Setting/
Procedure

• The default setting is “NO”

YES

“NO”

Summary of Contents for ineo 250



































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments