Develop ineo+ 25 User Manual Download Page 81

Page: 81 / 340

PS/PCL PRINT Menu

2-55

PS/PCL PRINT Menu

To display the [PS/PCL PRINT] menu, select [PS/PCL PRINT] in the main
screen (Copy mode), and then press the

Select

key. From this menu, jobs

stored on the machine’s hard disk (optional) can be printed or deleted, and
various PS/PCL printing settings can be changed.

The [PS/PCL PRINT] menu is structured as shown below.

To return to the previous screen in the [PS/PCL PRINT] menu, press
the

Back

key. (If the

Back

key is pressed while settings are being

specified, those settings are not saved.)

This menu item appears only if an optional Hard Disk Kit HD-P03 is

installed.

PS/PCL PRINT

PROOF/PRINT MENU

PAPER MENU

QUALITY MENU

SYS DEFAULT MENU

Summary of Contents for ineo+ 25





















































































































































































































































































































































Search results

Summary of Contents for ineo+ 25

Reviews:

Brands by name

Popular brands

Develop ineo+ 25, User Manual

Search results

Summary of Contents for ineo+ 25

Reviews:

Brands by name

Popular brands