manualshive.com logo in svg

Develop ineo+ 25, User Manual

Share
Download
Develop ineo+ 25 User Manual Download Page 198

Scanning With the Machine

7-20

Registering/Editing Addresses

Addresses can be registered/edited in the favorite list, as speed dial destina-
tions or as group dial destinations.

d

Addresses can also be registered/edited with Web Connection or with 
LSU (Local Setup Utility) on the enclosed Applications CD/DVD. For 
details, refer to the [Reference Guide] on the Documentation CD/
DVD.

d

The same settings menu used to register/edit fax numbers is used to 
register/edit addresses. For details on registering/editing fax num-
bers, refer to the [Facsimile User’s Guide] on the Documentation CD/
DVD.

Registering in the Favorite List

From the speed dial destinations and group dial destinations registered on 
this machine, register a maximum of 20 destinations in the favorite list for 
convenient access to frequently specified destinations. Follow the procedure 
described below to register an address (e-mail address, FTP address or 
SMB address) on the favorite list.

1

In the main screen (Scan mode), press the 

+

 or 

,

 key to select [UTILITY], 

and then press the 

Select

 key.

2

Press the 

+

 or 

,

 key to select [DIAL REGISTER], and then press the 

Select

 key.

3

Press the 

+

 or 

,

 key to select [FAVORITE], and then press the 

Select

 

key.

d

If data is already registered on the favorite list, continue with step 
7 after completing step 3.

4

Press the 

Addressbook

 key to switch between [SPEED DIAL] and 

[GROUP DIAL].

5

Use the keypad to type in the number (between 1 and 250) for the speed 
dial destination or the number (between 1 and 20) for the group dial des-
tination to be registered on the favorite list, and then press the 

Select

 

key.
The information registered for the selected speed dial destination or 
group dial destination appears. 

6

Press the 

Select

 key again.

7

To register another address, press the 

+

 or 

,

 key to select [ADD], press 

the 

Select

 key, and then repeat the procedure from step 4.

8

To finish registering addresses, press the 

+

 or 

,

 key to select [FINISH], 

and then press the 

Select

 key.

Summary of Contents for ineo+ 25





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands