Develop ineo+ 25 User Manual Download Page 189

Page: 189 / 340

Scanning With the Machine

7-11

Follow the instructions that appear on the computer screen.

The scan data is saved in the folder specified with LinkMagic. For
details, refer to the [Reference Guide] on the Documentation CD/
DVD.

Saving Data on a USB Memory Device (Scan to USB
Memory)

Follow the procedure described below to save scan data to a USB memory
device plugged into the USB HOST port of this machine.

This machine is compatible with a USB memory device of 4 GB or
less.

Plug the USB memory device into the USB HOST port of this machine.

In the main screen (Scan mode), press the

key to select [SCAN

TO], and then press the

Select

key.

Press the

key to select [SCAN TO USB MEMORY], and then press

the

Select

key.

Depending on the USB memory device that is used, it may take some
time for the scan data to be transferred.

Summary of Contents for ineo+ 25





















































































































































































































































































































































Search results

Summary of Contents for ineo+ 25

Reviews:

Brands by name

Popular brands

Develop ineo+ 25, User Manual

Search results

Summary of Contents for ineo+ 25

Reviews:

Brands by name

Popular brands