manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 99 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 99

ineo+ 224/284/364/454/554

5-11

5

[Resolution]

To display: [Scan/Fax] - [Resolution]

Select the resolution of the original for scanning.

Tips

-

The finer the scan resolution is, the larger the data volume becomes, resulting in longer transmission 
time. When you are using E-mail TX or Internet Fax, check that the data capacity is not restricted.

Settings

Description

[Scan Resolution]

Select the resolution of the original for scan transmission.
To use E-mail TX, SMB Send, FTP TX, WebDAV Send, or Save in User Box, 
the following resolution is selected to scan the original.
•

[200 

e

 200 dpi]: Select this option to scan a standard original.

•

[300 

e

 300 dpi]: Select this option to scan a standard original with the 

higher resolution.

•

[400 

e

 400 dpi]: Select this option to scan an original containing small 

characters and drawings.

•

[600 

e

 600 dpi]: Select this option to convert an original to a file of the 

maximum size. This option is available when scanning an original such 
as a full-color photo, which requires a fine level of image quality.

[Fax Resolution]

Select the resolution of the original for sending a fax.
To use Fax TX, Internet Fax, or IP Address Fax, the following resolution is 
selected to scan the original.
•

[Normal]: Select this option to scan originals that do not require a fine 
level of image quality, or when you want to send a large number of orig-
inals quickly.

•

[Fine]: Select this option to scan a standard original.

•

[Super Fine]: Select this option to scan originals containing small char-
acters or drawings.

•

[Ultra Fine]: Select this option to scan originals that require a fine level 
of image quality.

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments