manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 80 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 80

Registering multiple destinations as a group (Create Group)

4

4-6

ineo+ 224/284/364/454/554

4.2

4.2

Registering multiple destinations as a group (Create Group)

Create Group

Register multiple destinations as a group. Create Group is a convenient way to broadcast a fax.

Up to 100 groups can be registered for Group.

Related setting (for the administrator)

-

You can specify whether to allow the user to register or change destinations (default: [Allow]). For de-
tails, refer to page 7-8.

Registering a group

0

To register a group, you must register the one-touch destinations to be added to the group in advance.

1

Tap [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Group] - [New].

%

The administrator can perform the same actions by selecting [Administrator Settings] - [One-
Touch/User Box Registration].

2

Enter destination information, then tap [OK].

%

For details on registration information, refer to page 6-7.

Tips

-

To check the settings for a registered group, select its registered name, then tap [Check Job Set.].

-

To change the settings for a registered group, select its registered name, then tap [Edit].

-

To delete a registered group, select its registered name, then tap [Delete].

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments