manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 71 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 71

ineo+ 224/284/364/454/554

3-15

3.6

Receiving Options

3

Fixing the print paper size ([Print Paper Size])

You can always print on the specified size of paper irrespective of the paper size of the received fax.

If the size of the received fax is different from the specified print paper size, the fax is printed while increasing 
or reducing the size according to the print paper size.

For details on how to configure the settings, refer to page 7-25.

Fixing the print paper tray ([Tray Selection for RX Print])

You can always print on the paper loaded into the specified tray irrespective of the paper size of the received 
fax.

If the size of the received fax is different from the size of the paper in the specified tray, the fax is printed while 
increasing or reducing according to the paper size of the tray.

For details on how to configure the settings, refer to page 7-26.

Tips

-

If the tray is specified in [Tray Selection for RX Print], the setting for [Print Paper Size] is ignored ([Print 
Paper Selection] is automatically switched to [Auto Select]).

-

If [Min. Reduction for RX Print] is set to [Full Size], [Tray Selection for RX Print] is compulsory switched 
to [Auto].

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments