manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 69 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 69

ineo+ 224/284/364/454/554

3-13

3.6

Receiving Options

3

3.6.4

Forwarding a received fax to another destination (Forward TX)

Forward TX

Forward TX is a function that transfers a received fax to a pre-specified destination.

A received fax can be forwarded to an individual E-mail address or saved in a shared folder on a computer. 
It can be handled as a file on a computer, thereby reducing printing costs.

Tips

-

If Forward TX is enabled, this function cannot be used together with the following functions.

–

Memory RX, PC-Fax RX, TSI Routing

Operations required to use this function (for the administrator)

Enable the Forward TX function. Also, register forward destinations of received faxes.

For details on how to configure the settings, refer to page 7-28.

3.6.5

Stopping the fax print during lunch breaks and at night

While this machine is inactive, for example, during breaks or night hours on working days, press the 

Power

 

key to set the Sub Power Switch OFF mode, reducing the power consumption. It is impossible to print faxes 
received in Sub Power OFF mode. To print them, press the 

Power

 key to release the Sub Power OFF mode.

d

Reference

Pressing the Power key to switch to the Sub Power OFF status (when [Utility]- [Administrator Settings] - [Sys-
tem Settings] - [Power Supply/Power Save Settings] - [Power Key Setting] is set to the default [Sub Power 
OFF]). For details on the procedure to switch to the Sub Power OFF status, refer to [User's Guide: Introduc-
tion].

You can use the weekly timer for automatic switching between normal and power save modes. For details 
on how to configure the settings, refer to page 7-6.

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments