Develop ineo+ 224 Instructions For Use Manual Download Page 59

Page: 59 / 176

ineo+ 224/284/364/454/554

3-3

3.1

IP Address Fax function

Sending and receiving an IP address fax

3.1

IP Address Fax function

IP Address Fax is a function used to send and receive faxes within a limited network such as an enterprise
network.

Specify an IP address for the destination. The same network as the one used by the computers is used to
transmit faxes. Therefore, communication costs are not charged as they are for normal faxes.

In addition to IP address, you can also use a host name and E-mail address to specify the destination.

The following describes the precautions for using the IP Address Fax.

IP Address Fax must be configured by your service representative. For details, contact your service rep-
resentative.

To use the IP Address Fax function, the

Fax Kit

is required.

Summary of Contents for ineo+ 224

















































































































































































Search results

Summary of Contents for ineo+ 224

Reviews:

Develop ineo+ 224, Instructions For Use Manual, Page: 59 / 176

Search results

Summary of Contents for ineo+ 224

Reviews: