Develop ineo+ 224, Instructions For Use Manual, Page: 52 / 176

Receiving Options 2
2-14 ineo+ 224/284/364/454/554
2.5
2.5.6 Printing a fax on both sides of sheets of paper ([Duplex Print (RX)])
Duplex Print (RX)
A fax that contains multiple pages is printed on both sides of sheets of paper to save the number of sheets.
Operations required to use this function (for the administrator)
Enable the 2-Sided Print function.
For details on how to configure the settings, refer to page 7-25.
2.5.7 Configuring the fax print settings (for the administrator)
Default print settings ([Print Paper Selection]/[Min. Reduction for RX Print])
A received fax is printed according to the following conditions depending on the page size of the fax.
A standard-size fax, such as A4, is printed on the same standard size paper as the received fax while being
slightly reduced in size (default: 96%).
For example, an A3 fax is printed on A3 paper, and a B4 fax on B4 paper, while reducing the print size to 96%
respectively.
For details on the fax print settings, refer to page 7-24.
Tips
- For faxes that are longer in the longitudinal direction than the standard size, the optimal paper size is
determined based on the width and length of the fax, and printed on paper of the same size. If the op-
timal size paper is not available, the fax is printed on paper of a similar size.