manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 43 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 43

ineo+ 224/284/364/454/554

2-5

2.2

Setting up for Internet fax (for the administrator)

2

2.2.2

Operations required to use this function

Checking the LAN cable connection

Check that a LAN cable connected to the network is connected to 
the LAN port of this machine.

Checking the network settings

Check that an IP address is assigned to this machine. Tap [Utility] - [Device Information], and check that an 
IP address is displayed.

d

Reference

If no IP address is displayed, you will need to configure the network. For details, refer to [User's Guide: Web 
Management Tool].

Configuring the Internet fax environment

Enable the Internet fax function. In addition, specify the information of this machine and settings required to 
send and receive E-mail.

How to configure the setting is explained using 

Web Connection

. For details, refer to [User's Guide: Web 

Management Tool].

Registering Header Position

Register the machine name, company name, etc. to be printed on faxes.

For details on how to configure the settings, refer to page 7-22.

Setting the date and time for the machine

Set the date and time on this machine to be printed on sent and received faxes.

For details on how to configure the settings, refer to page 7-6.

d

Reference

If an NTP (Network Time Protocol) is used to set the time, the date and time on this machine can be auto-
matically adjusted. How to configure the setting is explained using Web Connection. For details, refer to [Us-
er's Guide: Web Management Tool].

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments