Develop ineo+ 224 Instructions For Use Manual Download Page 30

Page: 30 / 176

Option settings for fax transmission

1-22

ineo+ 224/284/364/454/554

1.4

Scanning a long original ([Long Original])

Load the long original that cannot be placed on the

Original Glass

and larger in the feeding direction than

the full standard size (A3 or 11 x 17) on

ADF

. There is no need to enter the original size in advance: the

ADF

will detect the size automatically.

For details, refer to page 5-16.

Specifying the original loading direction ([Original Direction])

When scanning a 2-sided original etc., you can specify the direction in which the original is loaded so that
the vertical direction is set correctly.

For details, refer to page 5-16.

Specifying the original binding position ([Binding Position])

When scanning a 2-sided original, specify the original binding position in [Binding Position] to prevent the
binding positions from being reversed between the front and rear faces.

For details, refer to page 5-16.

Scanning while removing dust from the slit glass ([Despeckle])

When scanning an original in

ADF

, scanning of the original(s) and removal of dust from the

Slit Scan Glass

are performed alternately, so that the original is always scanned using clean

Slit Scan Glass

It takes longer to finish scanning, compared to the normal operation.

For details, refer to page 5-16.

Summary of Contents for ineo+ 224

















































































































































































Search results

Summary of Contents for ineo+ 224

Reviews:

Develop ineo+ 224, Instructions For Use Manual, Page: 30 / 176

Search results

Summary of Contents for ineo+ 224

Reviews: