Develop ineo+ 224, Instructions For Use Manual

Page: 164 / 176

7
7-30 ineo+ 224/284/364/454/554
[Sequential TX Report]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Sequential TX Report]
Select whether to print a report containing results of faxes sent by polling and broadcast.
[ON] is selected by default.
[Broadcast Result Report]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Broadcast Result Report]
Select whether to combine results of broadcast on all destinations involved or list them for each destination.
[All Destinations] is specified by default.
[TX Result Report Check]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [TX Result Report Check]
Select whether to display a screen that asks whether you want to print a TX Result Report each time a fax is
sent.
[OFF] is specified by default.
[Network Fax RX Error Report]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Network Fax RX Error Re-
port]
Select whether to print a report if the machine has failed to receive an Internet fax or IP address fax.
[ON] is selected by default.
[MDN Message]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [MDN Message]
Select whether to print a report notifying that an Internet fax has been sent to the recipient machine.
[ON] is selected by default.
[DSN Message]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [DSN Message]
Select whether to print a report notifying that an Internet fax has been sent to the mail server of the recipient
machine.
[OFF] is specified by default.
[Print E-mail Message Body]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings] - [Print E-mail Message Body]
Select whether to print a report notifying that an Internet fax has been successfully received after it was re-
ceived. The report has the subject and message text of an Internet fax.
[ON] is selected by default.
[Job Settings List]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Job Settings List]
Print the list of settings associated with faxes.
Change print settings as required, then tap [Start] to start printing.