Develop ineo+ 224, Instructions For Use Manual, Page: 160 / 176

7
7-26 ineo+ 224/284/364/454/554
[Tray Selection for RX Print]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Tray Selection for RX Print]
Specify a paper tray if you want to fix the paper tray used to print a fax.
[Auto] is specified by default.
[Min. Reduction for RX Print]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Min. Reduction for RX Print]
If necessary, change the reduction ratio that is used when printing a fax.
[96]% is selected by default.
Tips
- If [Min. Reduction for RX Print] is set to [Full Size], [Print Paper Selection] is set to [Auto Select], [Tray
Selection for RX Print] to [Auto] and [Print Separate Fax Pages] to [OFF].
[Print Separate Fax Pages]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Print Separate Fax Pages]
Select whether to print a fax longer than the standard size on separate pages.
This option is not available if [Duplex Print (RX)] is set to [ON].
[OFF] is specified by default.
[No. of Sets (RX)]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [No. of Sets (RX)]
If necessary, change the number of copies to print a fax.
[1] is selected by default.
[RX Document Print Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [RX Document Print Settings]
Select whether to print a received network fax in color or black-and-white. To restrict the print to only black-
and-white print, select [Black Only].
[Allow Color and Black] is specified by default.
[Function Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings]
Configure the settings for using various fax transmission and reception functions.
Settings Description
[Function ON/OFF Setting] Enable or disable fax transmission and reception functions, such as Con-
firm Address that prevents wrong fax transmission, F-Code TX, and Relay
RX.
For details, refer to page 7-27.
[Memory RX Setting] Configure the settings for using the Memory RX function.
For details, refer to page 7-27.
[Closed Network RX] Configure the settings for using the Closed Network RX function.
For details, refer to [User's Guide: Fax Operations].
[Forward TX Setting] Configure the settings for using the Forward TX function.
For details, refer to page 7-28.
[Incomplete TX Hold] Configure the settings for using the Fax Retransmit function.
For details, refer to [User's Guide: Fax Operations].
[PC-Fax Permission Set-
ting] Select whether to allow PC-Fax TX using the fax driver.
For details, refer to [User's Guide: Fax Operations].