manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 154 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 154

7

7-20

ineo+ 224/284/364/454/554

[Detail Settings]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings]

Configure the detailed network settings.

[AppleTalk Settings]

When using the Mac operating system, set up the AppleTalk operating en-
vironment.

[Bonjour Setting]

When using the Mac operating system, set up the Bonjour operating envi-
ronment.

[TCP Socket Settings]

Configure the TCP Socket operating environment.

[Network Fax Settings]

Select whether to use Internet fax and IP address fax respectively. To use 
IP address fax, configure the SMTP transmission environment.

[WebDAV Settings]

Configure the WebDAV Send environment and the WebDAV server func-
tion setting of this machine.

[DPWS Settings]

Configure the settings to print or scan data using the Web service (DPWS: 
Devices Profile for Web Services).

[Distributed Scan Settings]

Select whether to use the Distributed Scan Management with this ma-
chine.

[SSDP Settings]

Select whether to use the SSDP (Simple Service Discovery Protocol). To 
use SSDP, change the multicast TTL as necessary.

[Detail Settings]

Configure the detailed network settings.

[IEEE802.1x Authentication 
Settings]

Select whether to use IEEE802.1x authentication. To use IEEE802.1x au-
thentication, check the authentication status and configure the certification 
verification items.

[Web Browser Setting]

Select whether to enable a Web Browser.

[Bluetooth Setting]

Select whether to enable Bluetooth.

[Single Sign-On Setting]

Join this machine to the Active Directory domain, and configure settings to 
build the single sing-on environment.

[IWS Settings]

Configure the IWS (Internal Web Server) operating environment.

[Remote Panel Settings]

Configure the settings for remote control of the 

Control Panel

 of this ma-

chine from another computer.

[Internet ISW Settings]

Download the firmware of this machine via the Internet, and configure set-
tings to update the firmware.

Settings

Description

Settings

Description

[Device Setting]

Check the MAC address of this machine, enable or disable LLTD (Link Lay-
er Topology Discovery), and specify the network speed setting.
For details, refer to [User's Guide: Web Management Tool].

[Time Adjustment Setting]

Configure the setting for automatically adjusting the date and time on this 
machine using the NTP (Network Time Protocol) server.
For details, refer to [User's Guide: Web Management Tool].

[Status Notification Setting]

Configure the setting for notifying to the registered E-mail address when a 
warning such as for toner replacement or a paper jam occurs on this ma-
chine.
For details, refer to [User's Guide: Web Management Tool].

[Total Counter Notification 
Settings]

Configure the setting for sending counter information managed by this ma-
chine to a registered E-mail address.
For details, refer to [User's Guide: Web Management Tool].

[PING Confirmation]

Send a ping to the device communicating with this machine, to check for 
proper connection.
For details, refer to [User's Guide: Web Management Tool].

[SLP Setting]

Select whether to enable SLP (Service Location Protocol).
For details, refer to [User's Guide: Web Management Tool].

[LPD Setting]

Select whether to enable LPD (Line Printer Daemon).
For details, refer to [User's Guide: Web Management Tool].

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments