manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 143

ineo+ 224/284/364/454/554

7-9

7

[Registering and Changing Addresses]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to 
Job Settings] - [Registering and Changing Addresses]

Select whether to allow the user to register or change destinations.

[Allow] is specified by default.

[Change the "From" Address]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to 
Job Settings] - [Change the "From" Address]

Select whether to allow the user to change sender E-mail address ("From" address).

[Restrict Operation]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Operation]

Specify items for which access is restricted.

[Change Registered Over-
lay]

Select whether to allow the user to overwrite or delete a registered overlay 
image.
For details, refer to [User's Guide: Copy Operations].

[Biometric/IC Card Info. 
Registration]

Select whether to allow the user to register or delete a user's biometric or 
Card authentication information.
For details, refer to [User's Guide: Copy Operations].

[Synchronize User Authen-
tication & Account Track]

Specify whether to allow users to change the settings for synchronizing 
user authentication and account track when user authentication and ac-
count track are enabled.
For details, refer to [User's Guide: Copy Operations].

Settings

Description

Settings

Description

[Allow]

Allow the user to change the "From" address.
[Allow] is specified by default (without user authentication).

[Administrator E-Mail Ad-
dress]

Prohibit the "From" address from being changed and use the administra-
tor's E-mail address.

[Login User Address]

Prohibit the "From" address from being changed and use the user's E-mail 
address. Administrator's E-mail address is used if user's E-mail address 
has not been registered.
[Login User Address] is specified by default (with user authentication).

Settings

Description

[Restrict Broadcasting]

Select whether to prohibit the user from sending faxes to multiple destina-
tions. To prohibit broadcast, select [ON].
[OFF] is specified by default.

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands