Develop ineo+ 224 Page 134 Instructions For Use Manual Download

Page: 134 / 176

6-14

ineo+ 224/284/364/454/554

[Black Compression Level]

To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Black Compression Level]

Select the default compression method for black-and-white fax from [MH] and [MMR].

Data size of [MH] is larger than [MMR]. If you cannot open the file saved in [MMR], save data in [MH].

[MMR] is specified by default.

[Default Scan/Fax Settings]

To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Default Scan/Fax Settings]

Change the default settings (settings when the power is turned on, and the

Reset

is pressed) in fax/scan

mode.

You can change the setting by selecting [Current Setting] after the option settings in fax/scan mode are
changed.

[Factory Default] is specified by default.

[Default Enlarge Display Settings] ([Scan/Fax Settings])

To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Default Enlarge Display Settings]

Change the default settings (settings when the power is turned on, and the

Reset

is pressed) in fax/scan

mode, when using in enlarge display mode.

You can change the setting by selecting [Current Setting] after the option settings in fax/scan mode are
changed.

[Factory Default] is specified by default.

[Color TIFF Type]

To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Color TIFF Type]

Select the default compression method for saving original data in the TIFF format from [TIFF(TTN2)] and
[TIFF(modified TAG)].

If you cannot open the file saved in [TIFF(TTN2)], save data in [TIFF(modified TAG)].

[TIFF(TTN2)] is specified by default.

Summary of Contents for ineo+ 224

















































































































































































Search results

Summary of Contents for ineo+ 224

Reviews:

Related manuals for ineo+ 224

Brands by name

Popular brands

Develop ineo+ 224, Instructions For Use Manual

Search results

Summary of Contents for ineo+ 224

Reviews:

Related manuals for ineo+ 224

Brands by name

Popular brands