manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 128

6

6-8

ineo+ 224/284/364/454/554

[E-Mail Subject]

To display: [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [E-Mail Settings] 
- [E-Mail Subject] - [New]

Register a fixed subject phrase of the E-mail message. You can register up to 10 subject phrases.

Tips

-

To check the registered fixed subject phrase, select the subject, then tap [Check Job Settings].

-

To change the registered fixed subject phrase, select the subject, then tap [Edit].

-

To delete the registered fixed subject phrase, select the subject, then tap [Delete].

[E-mail Body]

To display: [Utility] - [One-Touch/User Box Registration] - [Create One-Touch Destination] - [E-Mail Settings] 
- [E-mail Body] - [New]

Register a fixed text phrase of the E-mail message. You can register up to 10 text phrases.

Tips

-

To check the registered fixed text phrase, select the text, then tap [Check Job Settings].

-

To change the registered fixed text phrase, select the text, then tap [Edit].

-

To delete the registered fixed text phrase, select the text, then tap [Delete].

[Limiting Access to Destinations]

To display: [Utility] - [One-Touch/User Box Registration] - [Limiting Access to Destinations]

Limit the access to destinations for each user.

Tips

-

You can specify [Apply Levels/Groups to Destinations] within the access allowed level for the respective 
users. For details, contact your administrator.

-

To specify a reference allowed group, the administrator must register the group in advance. For details, 
contact your administrator.

d

Reference

How to configure the setting for limiting the access to destinations for each user is explained using 

Web Con-

nection

. For details, refer to [User's Guide: Web Management Tool].

Settings

Description

[Subject]

Enter a fixed subject phrase (using up to 64 characters).

Settings

Description

[Body]

Enter a fixed text phrase (using up to 256 characters).

Settings

Description

[Apply Levels/Groups to 
Destinations]

To limit access to a destination by users, assign a permissible access level 
or reference allowed group to the destination.
After selecting a destination from [Address Book], [Group] or [Program], 
tap [Apply Level] or [Apply Group], then assign an access allowed level or 
reference allowed group to the destination.

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands