manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 107 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 107

ineo+ 224/284/364/454/554

5-19

5

[Despeckle]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Despeckle]

Scan originals using the 

ADF

 while removing dust from the 

Slit Scan Glass

.

It takes longer to finish scanning, compared to the normal operation.

[Blank Page Removal]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Blank Page Removal]

Blank pages contained in the original loaded into the 

ADF

 are skipped when the original is scanned.

Select this check box when scanning an original that contains blank pages. Any blank pages that are detect-
ed are not counted as original pages.

Related setting

-

If blank pages are not detected correctly although [Blank Page Removal] is enabled to scan an original, 
adjust the level to detect blank pages. For details, refer to page 6-10.

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments