Develop ineo+ 224 Instructions For Use Manual Download Page 101

Page: 101 / 176

ineo+ 224/284/364/454/554

5-13

[Scan Size]

To display: [Scan/Fax] - [Scan Size]

Select the size of the original to be scanned.

Settings

Description

[Auto]

Scan by automatically selecting the size according to the original size.

[Inches]

Select this option to scan an inch-size original. Tap [Inches], and select a
standard inch size.

[Metric Sizes]

Select this option to scan a metric-size original. Tap [Metric Sizes], and se-
lect the standard metric size respectively.

[Other]

Select this option to scan a postcard or an original other than a inch- or
metric-size original. Tap [Other], and select each standard size.

[Photo Size]

Select this option to scan photos or originals in photo size. Tap [Photo
Size], and select a standard size.

[Custom Size]

Select this option to scan originals in custom size. Enter vertical and hori-
zontal values.

Summary of Contents for ineo+ 224

















































































































































































Search results

Summary of Contents for ineo+ 224

Reviews:

Develop ineo+ 224, Instructions For Use Manual, Page: 101 / 176

Search results

Summary of Contents for ineo+ 224

Reviews: