Develop ineo+ 224 Instructions For Use Manual Download Page 36

Page: 36 / 176

Option settings for fax transmission

1-28

ineo+ 224/284/364/454/554

1.4

Printing TX Stamp on scanned originals ([TX Stamp])

When scanning originals using

ADF

, a TX Stamp is printed on a scanned original to certify that the original

has been scanned.

For details, refer to page 5-29.

NOTICE

This function is not available for originals that must be kept clean.

Tips

The

Stamp Unit

is required to print TX Stamps.

The ink used for stamping is consumables. If the ink becomes faint, contact your service representative.

1.4.5

Other option settings (Application settings)

Scanning after erasing text and shadows in the margins of an original
([Frame Erase])

Erases an area of an identical specified width along the four sides of an original. You can specify the width
to be erased for each side.

This is convenient when you want to erase the reception record of the header and footer of a fax, or shadow
of punch holes on the original.

For details, refer to page 5-29.

Summary of Contents for ineo+ 224

















































































































































































Search results

Summary of Contents for ineo+ 224

Reviews:

Develop ineo+ 224, Instructions For Use Manual, Page: 36 / 176

Search results

Summary of Contents for ineo+ 224

Reviews: