Develop ineo+ 224 Page 31 Instructions For Use Manual Download

Page: 31 / 176

ineo+ 224/284/364/454/554

1-23

1.4

Option settings for fax transmission

Skipping blank pages ([Blank Page Removal])

Blank pages contained in the original loaded into the

ADF

are skipped when the original is scanned.

For details, refer to page 5-16.

Splitting the left and right pages of a book and catalog ([Book Original])

You can scan two-page spreads such as books and catalogs separately into the left and right pages, or scan
them as one page. If you place a book or catalog on the

Original Glass

, you do not need to close the

ADF

to scan it.

For details, refer to page 5-21.

Scanning a number of originals in several batches ([Separate Scan])

If the number of original sheets is so large that they cannot be loaded into the

ADF

at the same time, you can

load them in several batches and handle them as one job.

In [Separate Scan], you can switch between

ADF

and

Original Glass

to scan the originals.

Summary of Contents for ineo+ 224

















































































































































































Search results

Summary of Contents for ineo+ 224

Reviews:

Related manuals for ineo+ 224

Brands by name

Popular brands

Develop ineo+ 224, Instructions For Use Manual

Search results

Summary of Contents for ineo+ 224

Reviews:

Related manuals for ineo+ 224

Brands by name

Popular brands