Develop ineo+ 224 Instructions For Use Manual Download Page 25

Page: 25 / 176

ineo+ 224/284/364/454/554

1-17

1.3

Specifying a destination

Direct input

In[Direct Input], press the corresponding key of the destination type to which you want to save or send, then
enter the destination information.

Reference

You can register the destination that you have entered directly into the address book. For details, refer to
page 4-8.

Related setting (for the administrator)

You can specify whether to allow the user to directly enter destinations (default: [Allow All]). For details,
refer to page 7-35.

Selecting from the history

In [Job History], select a destination from the history of scan transmission destinations or saved destinations.

The history shows the latest five fax destinations. When necessary, multiple destinations can be selected
from the history.

Tips

If a registered destination or a User Box is edited or if the Main Power Switch is turned off or on, infor-
mation of the history is deleted.

Purpose

Reference

To send Internet fax

page 5-5

To send IP Address fax

page 5-6

Summary of Contents for ineo+ 224

















































































































































































Search results

Summary of Contents for ineo+ 224

Reviews:

Develop ineo+ 224, Instructions For Use Manual, Page: 25 / 176

Search results

Summary of Contents for ineo+ 224

Reviews: