manualshive.com logo in svg

Develop ineo+ 224, Instructions For Use Manual, Page: 104 / 176

Share
Download
Develop ineo+ 224 Instructions For Use Manual Download Page 104

5

5-16

ineo+ 224/284/364/454/554

[Original Settings]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings]

Configure the setting so as to scan originals accurately according to the properties of the originals to be load-
ed.

Settings

Description

[Original Setting]

Configure the setting so as to scan originals accurately according to the 
properties of the originals to be loaded.
•

[Mixed Original]: Even for an original with pages of different sizes, by 
using 

ADF

, you can scan data while detecting the size for each page. 

For details, refer to page 5-17.

•

[Thin Paper Original]: Reduce the original feed speed of the 

ADF

 to pre-

vent the original from getting caught. For details, refer to page 5-17.

•

[Z-Folded Original]: Even the original sizes of folded originals can be 
detected accurately. For details, refer to page 5-18.

•

[Long Original]: Select this option to load an original that has the longer 
feeding direction than the standard size (11 

e

 17 or A3). For details, re-

fer to page 5-18.

[Despeckle]

Scan originals using the 

ADF

 while removing dust from the 

Slit Scan 

Glass

.

For details, refer to page 5-19.

[Blank Page Removal]

Blank pages contained in the original loaded into the 

ADF

 are skipped 

when the original is scanned.
For details, refer to page 5-19.

[Binding Position]

When scanning a 2-sided original, select the original binding position to 
prevent the binding positions being reversed between the front and rear 
faces.
For details, refer to page 5-20.

[Original Direction]

Specify the orientation of the loaded original. 
For details, refer to page 5-20.

Summary of Contents for ineo+ 224

















































































































































































Reviews:

No comments