Develop ineo 223 Page 72 Quick Manual Download

Page: 72 / 294

Replacing consumables

1-64

ineo 223/283/363/423

1.19

Replacing the toner bottle

The following procedure describes how to replace a toner bottle.

NOTICE

Before installing the new toner bottle, shake it up and down five to ten times.

Keep used toner bottles in their plastic bags inside their boxes to be collected by your service representative.

CAUTION

Handling toner and toner bottles

Do not burn toner or the toner bottle.

Toner expelled from the fire may cause burns.

CAUTION

Precautions for toner spills

Be careful not to spill toner inside the machine or get toner on your clothes or hands.

If your hands become soiled with toner, immediately wash them with soap and water.

If toner gets in your eyes, immediately flush them with water, and then seek professional medical
attention.

Summary of Contents for ineo 223







































































































































































































































































































Search results

Summary of Contents for ineo 223

Reviews:

Related manuals for ineo 223

Brands by name

Popular brands

Develop ineo 223, Quick Manual

Search results

Summary of Contents for ineo 223

Reviews:

Related manuals for ineo 223

Brands by name

Popular brands