manualshive.com logo in svg

Develop ineo 223, Quick Manual, Page: 56 / 294

Share
Download
Develop ineo 223 Quick Manual Download Page 56

Loading paper

1

1-48

ineo 223/283/363/423

1.17

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not 
loaded into a paper tray, or when you wish to print onto envelopes, OHP transparencies or other special 
paper.

Follow the procedure described below to load paper into the bypass tray.

1

Open the bypass tray.

%

When loading large-sized paper, pull out the tray extension.

2

Load the paper into the tray.

%

Load paper so that the side to be printed on faces downward.

%

Do not load so many pages that the top of the stack is higher than the 

,

 mark.

%

Up to 150 sheets plain paper can be loaded.

%

Slide the lateral guides to fit the size of paper to be loaded.

Summary of Contents for ineo 223







































































































































































































































































































Reviews:

No comments