manualshive.com logo in svg

Develop ineo 223, Quick Manual, Page: 166 / 294

Share
Download
Develop ineo 223 Quick Manual Download Page 166

Reducing electricity usage

3

3-38

ineo 223/283/363/423

3.14

3.14

Reducing electricity usage

This machine is equipped with two Power Save modes for conserving energy. In addition, the weekly timer 
allows use of the machine to be limited if days and time periods when the machine is not used are 
programmed.

Settings can be specified for these features from Administrator mode.

Low Power mode and Sleep mode

If no operation is performed on the machine for a specified length of time, the machine automatically enters 
a mode where it conserves energy. If no operation is performed on the machine for 15 minutes, the touch 
panel goes off and the machine enters Low Power mode. If no operation is performed for 20 minutes, the 
machine enters Sleep mode, where the energy conservation effect is larger (Factory default).

d

Reference

For details, refer to chapter 4 of the [User’s Guide Copy Operations].

Manually entering a Power Save mode

Instead of waiting the specified length of time, the machine can be manually set to enter a power-saving 
mode in order to conserve energy. As a factory default, the machine is set to enter Low Power mode when 
the [Power Save] key is pressed.

Weekly timer

The machine can be set to automatically enter Sleep mode according to a usage schedule determined by the 
administrator to limit the machine’s use. You can specify the time to turn on and off the machine separately 
for each day of the week, and also can specify operation days by date.

d

Reference

For details, refer to chapter 7 of the [User’s Guide Copy Operations].

Copying while the weekly timer is being used

The limitations of the weekly timer can temporarily be canceled so the machine can be used. In order to 
cancel the limitations, the operating hours must first be entered. A password for non-business hours must be 
specified in Administrator mode.

Summary of Contents for ineo 223







































































































































































































































































































Reviews:

No comments