Develop D1531iD User Manual Download Page 132

Page: 132 / 165

Error Displays and Other Indicators

8-6

D1531iD/D1831iD

<2nd Tray>

The same procedure applies when loading paper in the 3rd Tray, 4thTray,
and 5thTray.

Slide out the 2nd Tray.

Press down on the Paper Lifting
Plate until it clicks into the locked
position.

Load the paper in the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.

Have you loaded too much
paper in the tray?

➜

Do not load so much paper that
the top of the stack is higher
than the

mark.

Slide the Edge Guide and Trailing
Edge Stop against the edges of the
paper stack.

Do you know the special
precautions to be used when
loading paper?

➜

Be sure that the Edge Guide and
Trailing Edge Stop are pressed
tightly up against the edges of
the paper stack.

Slide the tray back into the copier.

Paper Lifting Plate

Summary of Contents for D1531iD






































































































































































Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands

Develop D1531iD, User Manual

Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands