Develop D1531iD User Manual Download Page 114

Page: 114 / 165

Using the Utility Mode

7-20

D1531iD/D1831iD

Input Account Procedure (A-2)

Call the Administrator Mode to the Display.

❍

Settings for the Administrator Mode (p.7-16)

Making sure that “Ad-” appears on
the Display, enter “1” from the 10-
Key Pad.

Press the [Start] key.

Making sure that “A--” appears on
the Display, enter “2” from the 10-
Key Pad.

Press the [Start] key.

Enter the 3-digit account number
from the 10-Key Pad.

Do you know the restrictions on
entering the account number?

➜

The account number must be in
three digits ranging from 001 to
999.

➜

If an account number entered already exists, the entry will be
rejected. Enter a different number.

Press the [Start] key.
This stores the account number.

✎

Tip
To program another account number successively, repeat steps 4
through 7.

Summary of Contents for D1531iD






































































































































































Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands

Develop D1531iD, User Manual

Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands